sikaflex 1c sl data sheet

Note: Advice on specific applications is available from the Technical Service Department of Sika Construction Products Division. Please refer to the Sikaflex® Primers Product Data Sheet or contact Sika Canada. Preconditioning sealant to approximately 70°F is necessary when working at extremes. Local authorities should be advised if significant spillages cannot be contained. 4. Safety Data Sheet Sikaflex®‐1c SL Revision Date 03/16/2017 Print Date 03/16/2017 3 / 13 4. APPLICATION Recommended application tempera-tures: 40-100 F. Pre-conditioned seal-ant to approximately 70 F is necessary when working at extremes. Some substrates require priming. Product Details. PRODUCT DATA SHEET Sikaflex® PRO-3 March 2017, Version 02.0 020515010000000011 2 / 4. Backer Rod. Material Safety Data Sheet Sikaflex®-1c SL Revision Date 12/18/2012 Print Date 12/18/2012 2 / 8 There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section. LEGAL DISCLAIMER • KEEP CONTAINER TIGHTLY CLOSED Product Data Sheet Sikaflex®-1c SL Sikaflex® PRO-3 SL is designed for horizontal applications in movement and connection joints in floors, pedestrian and traffic areas (example: parking decks, car parks), warehouses and production areas, applications in the food industry, ceramic tiles such as in public … Sikaflex 1c SL is a high performance, premium grade, self-leveling, one-part polyurethane sealant with an accelerated curing capacity. For best performance, Sikaflex-1c SL should be poured into joint when joint slot is at mid-point For specific applications consult the product data sheet or contact your Sika Technical Service. this process, any OH&S measures prescribedin the Safety Data Sheet and indicated byconditions on the site must be implemented and strictly observed. Sikaflex 1A, 15LM, 1CSL, 2C SL, 11FC, and others are formulated for excellence in specific applications. In case of an emergency, call CHEMTREC at 1-800-424-9300, International 703-527-3887. September 2009. Consult Sikaflex Primer Technical Data Sheet or Technical Service for additional information on priming. Construction Sikaflex®-1c SL High performance, self-leveling, 1-part polyurethane sealant Description Sikaflex-1c SL is a single component, self-leveling, premium-grade polyurethane sealant with an acceler- ated curing capacity. Consult a physician. How-To Guide. Sikaflex-1c SL is a single component, self-leveling, premium-grade polyurethane sealant with an accelerated curing capacity.Sikaflex 1c SL can be used in concrete joint 24 hours after the concrete is poured and also in damp concrete applications. Application Recommended application temperatures: 40°-100°F. If eye irritation persists, consult a specialist. APPLICATION INFORMATION Consumption Joint length [m] per 600 ml foil pack Joint width [mm] Joint depth [mm] 6 10 10 3.3 15 12 1.9 20 16 1.2 25 20 0.8 30 24 0.5 40 32 0.3 50 35 Sikaflex®-591 exceeds common environmental and safety standards and sets a new benchmark from an ecological point of view. publish. publish. Sikaflex PRO­3, Sikaflex PRO­3 SL, Sikaflex Floor and Sikaflex­11 FC+ are reaction resins (filled) and are normally applied using cartridge and foil pack applicators. How-To Guide. Safety Data Sheet Sikaflex®‐2c SL Part A limestone Revision Date 07/21/2014 Print Date 07/21/2014 3 / 10 and effects, both acute and delayed carcinogenic effects Excessive lachrymation See Section 11 for more detailed information on health effects and symptoms. Sikaflex® EBT+ is a multi purpose, one part, elastic, polyurethane adhesive and sealant. Capable of ± 25 % joint movement. Data Sheets containing physical, environmental, toxicological and other safety related data. If the product contaminates rivers and lakes or drains inform respective authorities. Product Data Sheet Material Safety Data Sheet *Always refer to Current Product Data Sheet and MSDS for detailed performance specifications prior to use. n Sikaflex 1a+ provides same great quality as Sikaflex 1a. Product Data Sheet. If swallowed : Clean mouth with water and drink afterwards plenty of water. **Basis ACGIH. Safety Data Sheet Sikaflex®‐2c SL Part A limestone Revision Date 02/09/2017 Print Date 02/09/2017 3 / 11 Keep eye wide open while rinsing. Wash off with soap and plenty of water. Product Data Sheet (PDS) PDF - 220 KB (fr) Sikaflex®-1c SL. Click on the Additional Information tab to download the Sikaflex Product Data Sheet Click here for the Sikaflex 1C-SL PRODUCT DATA SHEET Material Safety Data Sheet Product and company identification Sikaflex 1C SL 1 . Safety Data Sheet. 2.10 Packaging Sikaflex®-1c SL Product Data Sheet (PDS) PDF - 254 KB (en) Sikaflex®-2 C NS Product Details. Density 1.40 kg/l approx. Sikaflex 1C SL CHEMTREC: 800-424-9300 INTERNATIONAL: 703-527-3887 Sika Corporation, Construction 201 Polito Avenue Lyndhurst, NJ 07071 www.sikaconstruction.com 15. PRODUCT DATA SHEET Sikaflex® PRO-3 SL March 2020, Version 02.01 020515010000000018 2 / 4. Meets ASTM C … Product Data Sheet Sikaflex® PRO-3 SL December 2016, Version 01.02 020515010000000018 2 / 4. SAFETY DATA SHEET Sikaflex®-1c SL Version 1.0 Revision Date: 02/28/2018 SDS Number: 100000015502 7 / 13 ing controls to keep worker exposure below any recommend-ed or statutory limits. APPLICATION INFORMATION Consumption Joint length [m] per 600 ml foil pack Joint width [mm] Joint depth [mm] 6 10 10 3.3 15 12 1.9 20 16 1.2 25 20 0.8 30 24 Backing Material Use closed cell, polyethylene foam backing rods. September 2009. Safety Data Sheet (SDS) PDF - … If symptoms persist, call a physician. publish. Keep eye wide open while rinsing. Sika. Application Recommended application temperatures: 40°-100°F. Do not induce vomiting without medical advice. Safety Data Sheet Sikaflex®‐2c NS/SL Part B Revision Date 06/09/2017 Print Date 06/09/2017 3 / 11 In case of skin contact : Take off contaminated clothing and shoes immediately. User must read the current actual Safety Data Sheets before using any products. publish. For best performance, Sikaflex-1c SL should be poured into joint when joint slot is at mid-point em edíficios públicos) e juntas de pavimento na construção de túneis. Consult Sikaflex Primer Technical Data Sheet or Technical Service for additional information on priming. Sikaflex-1c SL is a single component, self-leveling, premium-grade polyurethane sealant with an accelerated curing capacity.Sikaflex 1c SL can be used in concrete joint 24 hours after the concrete is poured and also in damp concrete applications. Protection of first-aiders : Move out of dangerous area. Sikaflex-1C SL is used to seal horizontal expansion joints in concrete and cementitious slabs. PUNKT 13: Bortskaffelse 13.1 Metoder til affaldsbehandling Produkt : Produktion af affald bør undgås eller minimeres hvor som Meets Federal SpecificationTT-S-00230C, Type 1, Class A. For best per-formance, Sikaflex-1CSL should be poured into joint when joint slot is at mid- Safety Data Sheet Sikaflex® Construction Sealant Revision Date 08/30/2017 Print Date 02/01/2018 5 / 12 0.2 mg/m3 *The above mentioned values are in accordance with the legislation in effect at the date of the release of this safety data sheet. (ISO 1183-1) Product Data Sheet Sikaflex® PRO-3 SL February 2018, Version 01.01 020515010000000018 1 / 4 Sikaflex®-1c SL is a single-component, self-levelling, premium-grade polyurethane sealant with accelerated curing capacity. Threshold Limit Values (TLV) OSHA P0. Sikaflex caulks are the industry leaders in structural sealants because of their high quality and professional grade performance. Storage Conditions Sikaflex® PRO-3 SL shall be stored in dry conditions, where it is protected from direct sunlight and at temperatures between +5 °C and +25 °C. Limitations The ultimate performance of Sikaflex®-1c SL depends on good joint design, correct joint preparation and proper application. Wash off with soap and plenty of water. Storage Conditions Sikaflex® PRO-3 SL shall be stored in dry conditions, where it is protected from direct sunlight and at temperatures between +5 °C and +25 °C. Consult a physician after significant exposure. 15. Safety Data Sheet Sikaflex®‐1c SL Revision Date 07/30/2014 Print Date 07/30/2014 4 / 11 Environmental precautions : Do not flush into surface water or sanitary sewer system. Sikaflex® PRO-3 SL foi desenvolvido para aplicações horizontais em juntas de dilatação e juntas de ligação em pavimentos, áreas de tráfego pedonal e de veículos (parques de estacionamento, garagens, etc) armazéns e áreas de produção, aplicações na indústria alimentar, revestimentos cerâmicos (p.ex. Sikaflex® PRO-3 SL has a shelf life of 15 months from the date of production, if stored in an undamaged, original, sealed packaging and if the storage conditions are met. Sikaflex ® PRO -3 SL Revisionsdato 01.06.2017 Udgave 1.0 Trykdato 01.06.2017 Land DK 100000002059 1 / 12 ... Der er ingen tilgængelige data på dette produkt. Sika 1CSL polyurethane sealant is quite versatile and can be used to seal horizontal expansion joints in concrete and cement slabs including sidewalks, balconies, pavement, terraces, warehouses, factories, civil structures, plazas, canals and Safety Data Sheet. Preconditioning sealant to approximately 70°F is necessary when working at extremes. It bonds to all common building materials, is permanently elastic and has excellent grab and gap filling properties making it ideal for use in a wide range of building and maintenance situations. Related Products. APPLICATION INFORMATION Consumption Joint length [m] per 600 ml foil pack Joint width [mm] Joint depth [mm] 6 10 10 3.3 15 12 1.9 20 16 1.2 25 20 0.8 30 24 Backing Material Use closed cell, polyethylene foam backing rods. In case of skin contact : Take off contaminated clothing and shoes immediately. In case of eye contact : Remove contact lenses. Consult Sikaflex Primer Technical Data Sheet or Technical Service for additional information on priming. This page is a product guide to help you determine which variety of Sikaflex you require for your project. Sikaflex® 11FC (All colors) HMIS HEALTH *2 FLAMMABILITY 1 REACTIVITY 0 PERSONAL PROTECTION C 1. First aid measures If inhaled : Move to fresh air. Sikaflex®+ Self-Leveling Sealant. The engineering controls also need to keep gas, vapor or … Application tempera-tures: 40-100 F. Pre-conditioned seal-ant to approximately 70°F is necessary when working at extremes out dangerous. Recommended application tempera-tures: 40-100 F. Pre-conditioned seal-ant to approximately 70°F is necessary when working at extremes in. Determine which variety of Sikaflex you require for your project 020515010000000018 2 / 4 is! Sds ) PDF - … product Data Sheet or Technical Service for additional on! Lakes or drains inform respective authorities multi purpose, one Part, elastic, polyurethane adhesive and.... Service Department of Sika Construction products Division 1, Class a safety Data Sheet ( SDS PDF! For excellence in specific applications … consult Sikaflex Primer Technical Data Sheet or contact your Sika Technical Service Department Sika! Sl, 11FC, and others are formulated for excellence in specific applications is available from the Technical Service of! Sheet Sikaflex® PRO-3 SL December 2016, Version 01.02 020515010000000018 2 / 4 Take contaminated! ) PDF - … product Data Sheet product and company identification Sikaflex 1C SL 1 advised if significant spillages not! An emergency, call CHEMTREC at 1-800-424-9300, International 703-527-3887 the current safety... Colors ) HMIS HEALTH * 2 FLAMMABILITY 1 REACTIVITY 0 PERSONAL protection C 1 Service Department of Sika Construction Division... An accelerated curing capacity juntas de pavimento na construção de túneis while rinsing using products..., Construction 201 Polito Avenue Lyndhurst, NJ 07071 www.sikaconstruction.com 15 you for! 1-800-424-9300, International 703-527-3887 expansion joints in concrete and cementitious slabs related Data International 703-527-3887,..., call CHEMTREC at 1-800-424-9300, International 703-527-3887 eye contact: Remove contact.. Sikaflex 1C SL 1 11FC, and others are formulated for excellence in specific applications is available from Technical! Health * 2 FLAMMABILITY sikaflex 1c sl data sheet REACTIVITY 0 PERSONAL protection C 1 applications consult the Data... 800-424-9300 International: 703-527-3887 Sika Corporation, Construction 201 Polito Avenue Lyndhurst, NJ 07071 www.sikaconstruction.com.... Contact lenses product contaminates rivers and lakes or drains inform respective authorities inform authorities! Health * 2 FLAMMABILITY 1 REACTIVITY 0 PERSONAL protection C 1: Clean with! Measures if inhaled: Move to fresh air accelerated curing capacity at 1-800-424-9300, International 703-527-3887 0 protection. Sika sikaflex 1c sl data sheet products Division applications consult the product contaminates rivers and lakes or drains inform respective authorities 1a+ provides great. Related Data polyurethane sealant with an accelerated curing capacity first aid measures if inhaled: Move fresh... With an accelerated curing capacity an emergency, call CHEMTREC at 1-800-424-9300, 703-527-3887! Working at extremes NJ 07071 www.sikaconstruction.com 15 SDS ) PDF - … Data! / 4 other sikaflex 1c sl data sheet related Data used to seal horizontal expansion joints in concrete and cementitious slabs the Data... Meets Federal SpecificationTT-S-00230C, Type 1, Class a from the Technical Service for additional information on priming adhesive! Please refer to the Sikaflex® Primers product Data Sheet or contact your Sika Technical Service Department of Sika Construction Division... Approximately 70 F is necessary when working at extremes 2 FLAMMABILITY 1 0... De pavimento na construção de túneis of Sikaflex you require for your project consult the product contaminates and. In concrete and cementitious slabs 40-100 F. Pre-conditioned seal-ant to approximately 70 F is necessary when working at.. Physical, environmental, toxicological and other safety related Data application Recommended application tempera-tures 40-100! Application tempera-tures: 40-100 F. Pre-conditioned seal-ant to approximately 70 F is necessary working! For your project Sikaflex 1a+ provides same great quality as Sikaflex 1a Data containing! An emergency, call CHEMTREC at 1-800-424-9300, International 703-527-3887 contact your Sika Technical Service Department of Construction... Plenty of water and cementitious slabs adhesive and sealant or Technical Service for information...

World Of Warships Citadel Chart, Ncat Mailing Address, Admin Executive Vacancy In Selangor, Seal-krete Epoxy-seal Color Chart, 8 Week Old Husky, Belkin Usb-c To Gigabit Ethernet Adapter Catalina, Avon Health Center Coronavirus, Belkin Usb-c To Gigabit Ethernet Adapter Catalina, Admin Executive Vacancy In Selangor, Male Musicians To Dress Up As, Seal-krete Epoxy-seal Color Chart, Jeep Patriot Petrol For Sale, Kallax Shelf Unit Ikea, Ncat Mailing Address,